2.5 sec in total
76 ms
2.1 sec
264 ms
Click here to check amazing Q ATS content for Philippines. Otherwise, check out these important facts you probably never knew about qats.com
We engineer and manufacture thermal management solutions to cool BGAs, LEDs, power supplies and other devices where performance matters.
Visit qats.comWe analyzed Qats.com page load time and found that the first response time was 76 ms and then it took 2.4 sec to load all DOM resources and completely render a web page. This is quite a good result, as only 45% of websites can load faster.
qats.com performance score
76 ms
264 ms
8 ms
51 ms
72 ms
Our browser made a total of 166 requests to load all elements on the main page. We found that 86% of them (143 requests) were addressed to the original Qats.com, 4% (7 requests) were made to Google.com and 3% (5 requests) were made to Translate.googleapis.com. The less responsive or slowest element that took the longest time to load (1.4 sec) belongs to the original domain Qats.com.
Page size can be reduced by 2.9 MB (30%)
9.7 MB
6.8 MB
In fact, the total size of Qats.com main page is 9.7 MB. This result falls beyond the top 1M of websites and identifies a large and not optimized web page that may take ages to load. Only a small number of websites need less resources to load. Images take 8.0 MB which makes up the majority of the site volume.
Potential reduce by 371.4 kB
HTML content can be minified and compressed by a website’s server. The most efficient way is to compress content using GZIP which reduces data amount travelling through the network between server and browser. HTML code on this page is well minified. It is highly recommended that content of this web page should be compressed using GZIP, as it can save up to 371.4 kB or 91% of the original size.
Potential reduce by 1.6 MB
Image size optimization can help to speed up a website loading time. The chart above shows the difference between the size before and after optimization. Obviously, Q ATS needs image optimization as it can save up to 1.6 MB or 20% of the original volume. The most popular and efficient tools for JPEG and PNG image optimization are Jpegoptim and PNG Crush.
Potential reduce by 771.6 kB
It’s better to minify JavaScript in order to improve website performance. The diagram shows the current total size of all JavaScript files against the prospective JavaScript size after its minification and compression. It is highly recommended that all JavaScript files should be compressed and minified as it can save up to 771.6 kB or 66% of the original size.
Potential reduce by 108.8 kB
CSS files minification is very important to reduce a web page rendering time. The faster CSS files can load, the earlier a page can be rendered. Qats.com needs all CSS files to be minified and compressed as it can save up to 108.8 kB or 78% of the original size.
Number of requests can be reduced by 42 (26%)
162
120
The browser has sent 162 CSS, Javascripts, AJAX and image requests in order to completely render the main page of Q ATS. We recommend that multiple CSS and JavaScript files should be merged into one by each type, as it can help reduce assets requests from 18 to 1 for JavaScripts and from 20 to 1 for CSS and as a result speed up the page load time.
qats.com
76 ms
www.qats.com
264 ms
ga.js
8 ms
colorbox.css
51 ms
advanced.css
72 ms
style.css
147 ms
main.css
81 ms
jquery-1.11.1.min.js
152 ms
script.js
97 ms
jquery.js
186 ms
amazingcarousel.js
204 ms
initcarousel-0.css
123 ms
initcarousel-1.css
175 ms
initcarousel-2.css
176 ms
initcarousel-3.css
176 ms
initcarousel-4.css
176 ms
initcarousel-5.css
182 ms
initcarousel-6.css
200 ms
initcarousel-1.js
201 ms
__utm.gif
12 ms
WebResource.axd
179 ms
WebResource.axd
183 ms
WebResource.axd
182 ms
WebResource.axd
187 ms
WebResource.axd
191 ms
WebResource.axd
195 ms
Telerik.Web.UI.WebResource.axd
357 ms
collect
61 ms
jsapi
30 ms
element.js
33 ms
superfish.js
78 ms
tabs.js
77 ms
FF-cash.js
79 ms
jquery.easing.1.3.js
89 ms
jquery.cycle.all.min.js
80 ms
jquery.color.js
93 ms
coin-slider.js
93 ms
css
23 ms
APEC2016.jpg
204 ms
advancedOver25.jpg
54 ms
coldplate-thumbnail3.jpg
73 ms
maxiFLOW-thumbnail3.jpg
71 ms
iQ-200-thumbnail2.jpg
104 ms
Thermal-characterization-ALL1.jpg
79 ms
heatpipes-round4-thumb.jpg
81 ms
maxiGRIP-attachmnet-thumbnail4.jpg
100 ms
TEC-assemblies-thumbnail3.jpg
124 ms
TEC-module-ALL4.jpg
116 ms
candlestick-sensor-thumbnail4.jpg
118 ms
chillers-ALL4.jpg
142 ms
pushpin-ALL1.jpg
199 ms
TEC-module3-thumbnail.jpg
195 ms
TLC-100-thumbnail3.jpg
196 ms
maxiGRIP-attachmnet-thumbnail3.jpg
197 ms
eATVS4-8-ALL1.jpg
208 ms
cwt-100-thumbnail1.jpg
201 ms
HS-design-services-thumbnail1.jpg
199 ms
wind-tunnels-ALL2.jpg
696 ms
TEC-module2-thumbnail1.jpg
693 ms
Instruments-ALL1.jpg
213 ms
train-thumbnail.jpg
698 ms
TLC-100-thumbnail22.jpg
214 ms
HFC-100-thumbnail2.jpg
226 ms
thermview-thumbnail3.jpg
246 ms
flat-heatpipe-thumbnail2.jpg
244 ms
handheld-anemometer-thumbnail2.jpg
257 ms
clwt-115-thumbnail2.jpg
272 ms
extrusion-profile-thumbnail4.jpg
316 ms
qpedia-thumbnail.jpg
316 ms
LED-thumbnail3.jpg
316 ms
sensors-thumbnail2.jpg
323 ms
eshop-thumbnail.jpg
315 ms
Brick1-thumbnail2.jpg
313 ms
pinfin-thumbnail2.jpg
338 ms
pushpin-thumbnail2.jpg
311 ms
supergrip-thumbnail2.jpg
613 ms
device-specific-thumbnail2.jpg
753 ms
ASIC-thumbnail3.jpg
606 ms
low-profile-thumbnail3.jpg
615 ms
fansink-thumbnail3.jpg
587 ms
LED-thumbnail4.jpg
585 ms
LGA-thumbnail3.jpg
574 ms
crosscut-thumbnail6.jpg
572 ms
strightFIN-thumbnail3.jpg
568 ms
TLC-100-thumbnail4.jpg
551 ms
traversing-probe-thumbnail.jpg
499 ms
iTHERM-200-thumbnail2.jpg
500 ms
DAC-200-thumbnail2.jpg
504 ms
FCM-100-thumbnail3.jpg
501 ms
CIP-1000-thumbnail3.jpg
501 ms
iTHERM100-thumbnail2.jpg
535 ms
FSC-200-thumbnail2.jpg
528 ms
iFLOW-200-thumbnail3.jpg
521 ms
ethermview-thumbnail4.jpg
1233 ms
15 ms
PTM-100-thumbnail2.jpg
511 ms
ISD-thumbnail3.jpg
1213 ms
default+en.css
4 ms
default.css
15 ms
default+en.I.js
11 ms
atvs-2020-thumbnail3.jpg
491 ms
atvs-nxt-thumbnail3.jpg
1436 ms
default.css
20 ms
clwtc-1000-thumbnail3.jpg
485 ms
HP-97-thumbnail3.jpg
523 ms
translateelement.css
59 ms
main.js
375 ms
wtc-100-thumbnail1.jpg
499 ms
clwt-067-thumbnail2.jpg
498 ms
clwt-100-thumbnail2.jpg
509 ms
livechatjs.ashx
355 ms
CWT-pcb-thumbnail3.jpg
504 ms
CWT-106-thumbnail3.jpg
590 ms
cwt-108-thumbnail2.jpg
527 ms
cwt-107-thumbnail2.jpg
506 ms
BWT-100-thumbnail2.jpg
530 ms
async-ads.js
52 ms
small-logo.png
45 ms
heatpipes-flat-thumb1.jpg
216 ms
heatpipes-round3-thumb.jpg
245 ms
heatpipes-round2-thumb.jpg
246 ms
round-heat-pipe-ALL1.jpg
266 ms
heatpipes-round-thumb4.jpg
270 ms
heatpipes-flat2-thumb1.jpg
273 ms
heatpipes-flat-thumb.jpg
306 ms
heat-exchanger3-thumbnail.jpg
301 ms
Flow-Meter-5-thumbnail.jpg
732 ms
chillers5-thumbnail.jpg
336 ms
leak-detector-thumbnail2.jpg
341 ms
chiller-thumnail2.jpg
371 ms
leak-detector2-thumbnail2.jpg
373 ms
Flow-Meter-thumbnail.jpg
400 ms
heat-exchanger-thumbnail.jpg
401 ms
Flow-Meter-3-thumbnail.jpg
435 ms
element_main.js
39 ms
livechat.ashx
161 ms
chillers3-thumbnail.jpg
860 ms
leak-detector4-thumbnail.jpg
431 ms
heat-exchanger2-thumbnail.jpg
461 ms
Flow-Meter-ATS-FM-M-thumbnail3.jpg
488 ms
TEC-assemblies4a-thumbnail.jpg
516 ms
TEC-assemblies6-thumbnail1.jpg
544 ms
TEC-assemblies3-thumbnail2.jpg
569 ms
translate_24dp.png
43 ms
l
48 ms
cleardot.gif
46 ms
Brick.jpg
523 ms
Qpedia99_hp.jpg
562 ms
atvs-2020-email-sig5.jpg
590 ms
bg.png
703 ms
bg-row-1.png
618 ms
logo.png
779 ms
te_ctrl3.gif
11 ms
bg-row-22.gif
610 ms
bg-form.gif
610 ms
form-top-a.gif
608 ms
bg-content.png
611 ms
list-marker.png
602 ms
bg-footer.png
607 ms
lightbox-next.png
620 ms
lightbox-prev.png
601 ms
lightbox-close.png
603 ms
hoveroverlay-64-64-9.png
617 ms
bullet-24-24-0.png
586 ms
bg-submenu.png
590 ms
bg-menu.gif
573 ms
qats.com SEO score
EN
EN
UTF-8
Language claimed in HTML meta tag should match the language actually used on the web page. Otherwise Qats.com can be misinterpreted by Google and other search engines. Our service has detected that English is used on the page, and it matches the claimed language. Our system also found out that Qats.com main page’s claimed encoding is utf-8. Use of this encoding format is the best practice as the main page visitors from all over the world won’t have any issues with symbol transcription.
qats.com
Open Graph description is not detected on the main page of Q ATS. Lack of Open Graph description can be counter-productive for their social media presence, as such a description allows converting a website homepage (or other pages) into good-looking, rich and well-structured posts, when it is being shared on Facebook and other social media. For example, adding the following code snippet into HTML <head> tag will help to represent this web page correctly in social networks: